Hi,

This file "locks" mplayer, but it plays without problems in other players (Audacity, Rezound).
Could you tell me if there is something wrong with the file?

Thanks in advance,
Sergio Schmiegelow
sergio.schmiegelow@digitro.com.br

Additional data:
$ uname -a
Linux sergio-desktop 2.6.24-21-generic #1 SMP Mon Aug 25 17:32:09 UTC 2008 i686 GNU/Linux

$ ls -l /lib/libc[.-]*
-rwxr-xr-x 1 root root 1274092 2008-09-12 11:32 /lib/libc-2.7.so
lrwxrwxrwx 1 root root      11 2008-09-18 13:03 /lib/libc.so.6 -> libc-2.7.so

$ gcc -v
Usando especificações internas.
Destino: i486-linux-gnu
Configurado com: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.2 --program-suffix=-4.2 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-targets=all --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu --target=i486-linux-gnu
Modelo de fluxo de execução (thread): posix
gcc versão 4.2.4 (Ubuntu 4.2.4-1ubuntu3)

$ ld -v
GNU ld (GNU Binutils for Ubuntu) 2.18.0.20080103

$ as --version
GNU assembler (GNU Binutils for Ubuntu) 2.18.0.20080103
Copyright 2007 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or later.
This program has absolutely no warranty.

$ lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
Subsystem: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at e000 [size=16]
Capabilities: <access denied>

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7061
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at e500 [size=256]
Capabilities: <access denied>

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: Micro-Star International Co., Ltd. MS-7061
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e600 [size=256]
Region 1: Memory at ea001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at e9000000 [disabled] [size=128K]
Capabilities: <access denied>
This assembler was configured for a target of `i486-linux-gnu'.


This is the verbose output:
------------------------------------------------------
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm)   2200+ (Family: 6, Model: 8, Stepping: 1)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
get_path('codecs.conf') -> '/home/sergio/.mplayer/codecs.conf'
Reading /home/sergio/.mplayer/codecs.conf: Can't open '/home/sergio/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
Configuration: --enable-runtime-cpudetection --target=i586-linux --prefix=/usr --confdir=/etc/mplayer --mandir=/usr/share/man --win32codecsdir=/usr/lib/win32 --enable-largefiles --disable-libdvdcss-internal --enable-smb --enable-ftp --enable-cdparanoia --enable-radio --enable-lirc --enable-joystick --enable-xf86keysym --disable-tremor-internal --enable-liba52 --enable-musepack --enable-speex --enable-libvorbis --enable-mad --enable-mp3lib --enable-theora --enable-libdv --enable-libmpeg2 --enable-tv-v4l2 --enable-alsa --enable-ossaudio --enable-esd --enable-arts --enable-pulse --enable-nas --enable-xinerama --enable-menu --enable-xv --enable-vm --enable-gl --enable-xmga --enable-mga --enable-3dfx --enable-tdfxfb --enable-sdl --enable-aa --enable-caca --enable-dxr3 --enable-xvmc --with-xvmclib=XvMCW --enable-ggi --enable-fbdev --enable-freetype --enable-gif --enable-png --enable-jpeg --enable-liblzo --enable-fribidi --enable-ladspa --enable-gui --enable-mencoder
CommandLine: '-v' 'ssw_locks_mplayer.wav'
init_freetype
get_path('font/font.desc') -> '/home/sergio/.mplayer/font/font.desc'
font: can't open file: /home/sergio/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/sergio/.mplayer/fonts'
Using nanosleep() timing
get_path('input.conf') -> '/home/sergio/.mplayer/input.conf'
Can't open input config file /home/sergio/.mplayer/input.conf: No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed: 81 binds
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
get_path('ssw_locks_mplayer.wav.conf') -> '/home/sergio/.mplayer/ssw_locks_mplayer.wav.conf'

Playing ssw_locks_mplayer.wav.
get_path('sub/') -> '/home/sergio/.mplayer/sub/'
[file] File size is 7834 bytes
STREAM: [file] ssw_locks_mplayer.wav
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: wav format
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename ssw_locks_mplayer.wav ext: .wav
Trying demuxer 17 based on filename extension
==> Found audio stream: 0
======= WAVE Format =======
Format Tag: 1 (0x1)
Channels: 1
Samplerate: 8000
avg byte/sec: 16000
Block align: 2
bits/sample: 16
cbSize: 0
==========================================================================
demux_audio: audio data 0x2C - 0x1E9A  
Audio file file format detected.
==========================================================================
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
dec_audio: Allocating 2048 + 65536 = 67584 bytes for output buffer.
AUDIO: 8000 Hz, 1 ch, s16le, 128.0 kbit/100.00% (ratio: 16000->16000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Building audio filter chain for 8000Hz/1ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy 
[dummy] Was reinitialized: 8000Hz/1ch/s16le
[dummy] Was reinitialized: 8000Hz/1ch/s16le
AO: [pulse] 8000Hz 1ch s16le (2 bytes per sample)
AO: Description: PulseAudio audio output
AO: Author: Lennart Poettering
Building audio filter chain for 8000Hz/1ch/s16le -> 8000Hz/1ch/s16le...
[dummy] Was reinitialized: 8000Hz/1ch/s16le
[dummy] Was reinitialized: 8000Hz/1ch/s16le
Video: no video
Freeing 0 unused video chunks.
Starting playback...
ds_fill_buffer: EOF reached (stream: audio)  
ds_fill_buffer: EOF reached (stream: audio)  
ds_fill_buffer: EOF reached (stream: audio)  
A:   0.0 (00.0) of 0.5 (00.4) ??,?% 

MPlayer interrupted by signal 2 in module: play_audio
Uninit audio filters...
[libaf] Removing filter dummy 
Uninit audio: pcm
vo: x11 uninit called but X11 not inited..